Wednesday, 6 September 2023

Distributor rebuild and install

 Disy reinstall

Now the distributor has been rebuilt and recurved to suit more modern fuels, it was then time to reinstall.

Here are a few pictures of the freshly rebuilt distributor with the Pertronix I reinstalled and ready to fire.

The unit has been adjusted to run at 10 to 12deg rather than the factory 6deg and the mechanical advance has been recurved.




  The units is now installed and the engine is purring nicely.

at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

New Hood Scoops

 Time for a change in the colour scheme on the bonnet. For some time, the solid gold colour of the bonnet had me thinking. Some time ago, I ...

  • Brake conversion complete
      Pedal Modification Complete The last piece of the puzzle in terms of brake conversion was completed with the pedal modification completed ...
  • Drum to disk brake conversion
    Time for better stopping power The Mach 1 came from the factory with non power assist drum brakes. While they work fine, the non power assis...
  • Good original untouched Mustang
      Time for some documents and pictures of original looking stuff. Where to start on this one. Lets start at the back and work my way forward...